2088 Shell applied passive 4-20mA transmitter header 
 Technical conditions 
 1 input signal :4-20mA. DC two-wire transmitter 
 2 input voltage drop: less than 3.5V 
 3 Accuracy: ± (0.2% reading ± 1 digit) 
 4 Display mode: LCD (liquid crystal) display, digit height 10mm, green backlight 
 5 Sampling rate: 2.5 times / sec. 
 6. Display range: -1999 to 1999 (you can adjust the potentiometer through the jumper and set the range) 
 7. Temperature range: -20 ~ 70 ℃ rated temperature extremes of temperature -20 ~ 80 ℃ Storage Temperature -40 ~ 85 ℃ 
 8. Temperature coefficient: ≤ 80PPM / ℃ 
 9 Relative Humidity: 20% ~ 90% RH (no condensation) 
 10. Size: Φ48 × Φ38 × 19 mm 
 11 meter Weight: 23 grams 
 Shipping Information 
 1 for the provision of range of users, according to the factory calibration range of user requirements. Range of non-users, adjusted according to the value of 100.0 indicated the factory, use the instructions themselves can be adjusted according to the instructions. 
 (2) If the range is not in range of user requirements within the sub-tables, please note when ordering from the factory custom. 
 3 meter display unit only MPa, KPa, ℃ three tags in one, for other units or mm,%, mmHg, m, Pa, bar unit, please note when ordering. 
 4 meter backlight is generally green, for other colors such as white, blue, yellow, ordering instructions. 
 5. Header of the PCB to do to deal with moisture, please specify when ordering.